Knowing the rectangle's size answers a measurement question. Understanding the lines answers game questions: why a ball touching a boundary is in, where a back-row hitter can take off and where a server must be at contact.
The metric figures below follow the FIVB 2025–2028 indoor rulebook. The feet-and-inches figures are rounded conversions, not replacement construction specifications. US competitions and venues may have additional requirements.
The main court measurements
| Feature | Metric measurement | Approximate US conversion |
|---|---|---|
| Full court | 18 × 9 m | 59 ft × 29 ft 6 in |
| Each team's half | 9 × 9 m | 29 ft 6 in square |
| Attack-line distance | 3 m | 9 ft 10 in |
| Line width | 5 cm | About 2 in |
| Service-zone width | 9 m | 29 ft 6 in |
For the attack line, measure from the center-line axis to the rear edge of the attack line. The boundary lines are included in the playing rectangle, so do not add their width to make the court larger. These details appear in rules 1.1–1.4 of the FIVB rulebook.
The attack line restricts actions, not all movement
The front zone runs from the center-line axis to the rear edge of the attack line. It extends sideways beyond the court to the end of the free zone.
A back-row player may enter this area to defend, set or continue the rally. The line is not a barrier that back-row players are forbidden to cross.
The restriction applies to specific actions. To complete an attack with the ball entirely above the top of the net, a back-row player must take off from behind the attack line without touching or crossing it at takeoff. Landing in the front zone is allowed.
Takeoff and landing can be in different zones
Imagine a back-row outside hitter approaching through the middle. The player takes off legally behind the line, attacks above the net and lands in front. The landing does not make the attack illegal.
If the foot touches the attack line at takeoff, the analysis changes. Watching only where the player finishes the jump can therefore produce the wrong conclusion. Rotational status matters too: a front-row player's attack is not subject to the same back-row restriction.
A line can limit an action without forbidding the player from entering the area.
The position guide separates playing role from rotational status.
The service zone runs across the back of the court
A serve does not have to start from the right-hand corner. The correct server in the service order can use the 9-meter-wide service zone behind the end line. Its depth extends to the end of the free zone.
For a standing serve, check the server's floor contact at the service hit. For a jump serve, check it at takeoff. The server must not touch the court, including the end line, or the floor outside the service zone at the relevant moment. After contact, stepping or landing inside is permitted. USAV rule 12.4 sets out these details in the domestic rulebook.
Available floor space does not widen the service zone
A player moves farther sideways to create an angle. Even if the floor is clear, the lateral service-zone limits still apply. The preparation area and the actual takeoff or contact location need to be distinguished.
Why the court rectangle is not the full facility footprint
Players need free space beyond the boundaries to pursue the ball. A rally does not end simply because a player contacts the ball while standing outside the rectangle.
The FIVB base specification includes at least 3 meters of free zone on every side and at least 7 meters of unobstructed height. Its World and Official Competition specification uses 5 meters beyond the sidelines, 6.5 meters beyond the end lines and at least 12.5 meters of clear height.
Those are different scopes. They should not be presented as the universal clearance for every US school or local venue.
As a geometric illustration, adding a uniform 3-meter band around the court gives a 24 × 15-meter rectangle. That calculation does not size benches, circulation, accessible routes, equipment or every facility requirement.
A ball on the line is in
If any part of the ball contacting the floor touches a boundary line, the ball is in. The boundary belongs to the court.
This concerns ball-to-floor contact. It is different from a server touching the end line at takeoff or a back-row attacker touching the attack line: those actions involve separate provisions.
| Situation | Useful question |
|---|---|
| Ball near a sideline | Did any part contacting the floor touch the line? |
| Back-row attack | Where was takeoff, and how high was the ball at contact? |
| Jump serve | Did the foot touch the end line at takeoff? |
The rules guide connects these cases to the wider game.
Frequently asked questions
Is the attack line exactly 10 feet from the net?
The commonly used nickname is ten-foot line, but the metric standard is 3 meters, approximately 9 feet 10 inches. Use the governing measurement rather than treating the nickname as an exact conversion.
Are the six positions marked as boxes on the floor?
No. Positions 1–6 describe rotational order. Regulation lines do not create six compulsory boxes. See the rotation guide for that organization.
Does practicing on a smaller court change the official dimensions?
No. A modified court changes the learning task. Youth programs may also use their own formats, but that does not change the standard six-player court described here.
To connect court references with ball skills and team organization, explore the R17 formations.
